Quote:
Originally Posted by redsnapper
Blip the throttle 1/8 or a little but don't go past 2500rpm, does the idle hang (lean)? or Drop below Idle (rich).
Rev the throttle to 4000-5000RPM and let go.
Does it hang above idle 2000+ RPM (Lean)
Then you need to raise the needle.
|
I will have to try this tomorrow. I think I am at the point where I am trying to get it perfect, and it's probably fine. I sometimes don't know when to quit. Last I recall I have the clip in the 3rd slot with like 2 washers below.