Quote:
Originally Posted by Momaru
I'm very amused that on the OP link, 10-32 well nuts are in the picture for the 5mm...
That said, thanks for finding a distributor that doesn't require them getting shipped over the pond.
|
There is one distributor who states the 10-32 will work with our 5mm bolts...not the case as I found out...you can screw the 5mm's into a 10-32 nut with some effort but you get one shot since it screws up the bolts threads. A cheap tap set from Harbor Freight is adequate for rethreading the 10-32 nuts to avoid this problem.