Thread: Budget HP
View Single Post
Old August 25th, 2016, 07:55 PM   #8
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
I would take a bone stock bike add a full exhaust and eliminate the clean air system. Then add a K&N 9009 air filter. This makes jetting a snap.
Get hold of an ignition modual from a 1988-2007 250 ninja. This will increase the ignition timing seven deg. The wiring is pretty simple.
With some minor jetting changes and a couple hotter plugs . Not a jet kit just the proper Keihn pilot and main jets you will be at or about 30-32 hp. With a nice fat power band.

Thats a couple hundred for the exhaust. And maybe fifty for the modual on eBay. And another hundred for the rest. Do it all at one time and it's a weekend project. Plus some time doing a couple jet changes.

You will probubly want to change the rear sprocket also but that can wait until it is time for matinance.
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


1 out of 1 members found this post helpful.