ninjette.org - View Single Post - FS: Ninja 300 Street-Specific Parts

Burphel · September 20th, 2016, 05:48 AM

Hi all. I'm just about done with converting my 300 over to full-race duty. Which means I gots parts for you! Pretty much anything that you'd use on a street bike but not on a race bike, I have available. The following list are bits I know I have. If you need something and it's not on there, ask! I might have it. Prices are negotiable, especially if you want to bundle a few things. I'm basing prices off what they're going for on eBay with a healthy dose of common sense. Prices include basic shipping to the ConUS and should be paid via Paypal. I'll try to get some pictures up in the next week or so. I'm Burphel on eBay if you want to do some light stalking. Last I checked I was at around 130 reviews 100% positive.

*Almost complete set of gloss black Chinese-knockoff street bodywork. These were mounted on the bike when I bought it, but were very gently used. The ABS is plenty thick, fit isn't quite perfect but very close, same for the paint (no scratches, just not quite OEM quality). From 5 feet away, you won't know the difference. This includes all painted bits *except the front fender* plus the belly pan. Does not include hardware. Also includes smoked front turn signals. Does not included the textured infills, airbox panels, front radiator shroud or battery box; along with the front fender. These are going for $400 on ebay shipped (literally) from the socialist worker's paradise. I'm thinking $300.

*Kickstand/springs/bolt (KS switch not included). $25.

*Headlight assembly. Very slight scratch on one of the edges. Includes all wiring and the main bulbs (they look ok, but I forgot to check if they work before disassembly). Side/pilot bulb thingies are missing, but the sockets are there. All mounting tabs intact. $100

*Rear brake light assembly. Includes bulb (again, didn't test it but it looks ok) and wiring. $15

*Radiator fan and rear shroud-thingy. $20

*Rear brake switch. $10

*Rear fender assembly. Includes plate light and turn signals. $35

*Passenger seat. $20

*Stock tires (IRC RoadWinners). Don't know the mileage, but very little. $75 for the pair?

*Horn. Are you serious? $10 or I'll throw it in with something else.

*Mirrors. Includes pivot bracket thingy. No scratches, glass good. $20 for the pair

Stuff that's already sold/not available:
Fork springs
Windscreen
Front fender
Kickstand switch
Left side switchgear

Pic of the bike in full street trim:

September 20th, 2016, 05:48 AM	#1
Burphel ninjette.org member Name: Brian Location: NW USA Join Date: Aug 2016 Motorcycle(s): Triumph Bonneville, Ninja 300 Posts: 204	FS: Ninja 300 Street-Specific Parts Hi all. I'm just about done with converting my 300 over to full-race duty. Which means I gots parts for you! Pretty much anything that you'd use on a street bike but not on a race bike, I have available. The following list are bits I know I have. If you need something and it's not on there, ask! I might have it. Prices are negotiable, especially if you want to bundle a few things. I'm basing prices off what they're going for on eBay with a healthy dose of common sense. Prices include basic shipping to the ConUS and should be paid via Paypal. I'll try to get some pictures up in the next week or so. I'm Burphel on eBay if you want to do some light stalking. Last I checked I was at around 130 reviews 100% positive. Almost complete set of gloss black Chinese-knockoff street bodywork. These were mounted on the bike when I bought it, but were very gently used. The ABS is plenty thick, fit isn't quite perfect but very close, same for the paint (no scratches, just not quite OEM quality). From 5 feet away, you won't know the difference. This includes all painted bits except the front fender* plus the belly pan. Does not include hardware. Also includes smoked front turn signals. Does not included the textured infills, airbox panels, front radiator shroud or battery box; along with the front fender. These are going for $400 on ebay shipped (literally) from the socialist worker's paradise. I'm thinking $300. Kickstand/springs/bolt (KS switch not included). $25. Headlight assembly. Very slight scratch on one of the edges. Includes all wiring and the main bulbs (they look ok, but I forgot to check if they work before disassembly). Side/pilot bulb thingies are missing, but the sockets are there. All mounting tabs intact. $100 Rear brake light assembly. Includes bulb (again, didn't test it but it looks ok) and wiring. $15 Radiator fan and rear shroud-thingy. $20 Rear brake switch. $10 Rear fender assembly. Includes plate light and turn signals. $35 Passenger seat. $20 Stock tires (IRC RoadWinners). Don't know the mileage, but very little. $75 for the pair? Horn. Are you serious? $10 or I'll throw it in with something else. Mirrors. Includes pivot bracket thingy. No scratches, glass good. $20 for the pair Stuff that's already sold/not available: Fork springs Windscreen Front fender Kickstand switch Left side switchgear Pic of the bike in full street trim: __________________________________________________ Let he who has never re-used a crush washer cast the first stone... Last futzed with by Burphel; October 3rd, 2016 at 02:18 AM.