Quote:
Originally Posted by $OUTHWORTH
If I can remember correctly that is the one I used. It took me a little while to get it straight I keep blowing fuses If you can find the wiring diagram for the bike and use in in conjunction with the little half way useful directions for the tach you'll be good! Wiring is not my strong point what so ever but I managed to get it after some trial and error lol
|
I couldn't get mine to read RPM while plugged into the ignition wiring, but after some more messing with it, I found that if I connect the Speedo's tach wire to the pickup coil wire I get good results. I read somewhere that these cheap speedo's can't handle the full 12 volts from the ignition system to read RPM and need a lower voltage (like that from the pickup coil).