Quote:
Originally Posted by JacRyann
This is much easier to do by engaging the cable at release-lever first.
Trying to flip the release-lever the other way will just mess up the innards.
Connect the lower end of clutch cable to release-lever.
Loosen and shorten the housing with adjusters on both ends.
Install at clutch-lever on handlebar
Tighten with lower adjuster and lock in place.
Tighten clutch-lever adjuster so release is around middle of stroke.
That's it!
|
I have already tried to swivel the release lever 360 degrees and so have the same problem as the original post of it now coming out easily.
Will the above still work or do I need to first re-seat the comp clutch rod?