Quote:
Originally Posted by Darksik
Sorry for the late reply but, The carbs look same like the picture, but some if you try to connect the "vacuum hose to the petcock" the hoses is more bigger from one side,
|
This is correct location for petcock connection. Replace hose with one that fits both ends properly.
Quote:
ps: the vacuum of the petcock is connected on the "T", and that "T" is connected to the vacuum switch valve and don't remember what other hose is connected.
|
This is wrong. That's why your previous good petcock and the new one is not working. Remove hose from petcock and T. Cap the T. Connect correct hose to petcock.