What is this final resistance number for fuse-1? Repeat for all other fuses[/QUOTE]
Quote:
Originally Posted by JacRyann
Ok, let’s move downstream from battery and test things along way.
1. Pull 30a main fuse out of stater solenoid. Measure voltage at each fuse-leg terminal. What do you get?
2. Plug 30a main fuse back in
3. Measure voltage of white wire at ignition switch
4. Measure voltage of white/black wire at ignition switch
|
Okay so I did the tests:
Main fuse leg terminals: One read 13.3v and the other read 0.03v
White wire at ignition: 12.8v
White/Black Wire at ignition: 12.8v
Now while I was measuring those wires I tested them all and all of them but the grey wire read 12.8, the grey wire read 10v. Not sure if thats supposed to be that or not.