November 23rd, 2009, 07:34 PM
|
#26
|
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009
Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X
Posts: A lot.
MOTM - Sep '18, Feb '16
|
I was going to put a 250 engine into a 500 frame. it is bigger and would give plenty of room to work with . As far as hiding from the wind and building a fairing. It is way different. If I could of the amount of fabrication it would take to do that . I would also have the skill and tools to just make a frame. . It can be done no problem . But it is not a bolt in at all . This is some photos from EBay just to have a look
|
|
|