Quote:
Originally Posted by NaturalFlavored
I don't hear any noise from the spark the engine over powers it. I'm going to get new coils and see if that helps with starting the bike.
|
Do some testing first. Without positively identifying a part as bad through measurements, you’ll be replacing a perfectly-working part with a brand-new perfectly-working part and nothing changes.
- measure resistance of primary winding on each coil
- measure battery voltage
- measure battery voltage while cranking
- key ON, measure voltage at each coil’s red wire
We’re checking for some wiring issues as well. A lot of times, electrical components are perfectly fine, but wiring & connectors in between are defective. Since connectors are not sealed, corrosion is a common source of problems.