Ok the carbs are back together...
I installed them on the heads and connected the choke cable only. The airbox is off still - waiting for the gaskets to come and complete the airbox mod.
I decided to do a quick check realizing the mixture would be lean still. No synchronizing the carbs yet and no pilot mixture tuning has yet been completed either (screws at 2 1/2 turnes out). To my surprize the bike ran well even with no tunning. better than before I did the cleaning. It could even run at 500 rpm without stalling - never hapened before (quickly raised it back shortly after confirming).
Throttle response was great - no percieved lag. Given the box was off I could see the gates openning and they were openning together.
I guess 1.5 mm of washers under the jet needle helped.
Thanks for all your help folks.
|