[JmcEx2fifty]

Didn't check flow rate I installed a clear fuel line install right off the bat that as soon as I started riding the line went from Full to a 6 inch air bubble from the tank down and was barely trickling out of the petcock the O-ring from the diaphragm came apart and got stuck in the on off valve. Cleared it and altered it to no longer require vacuum plugged off both of the vacuums on the carburetors. Soon as I hooked the fuel line back up and opened it fuel slammed all the way up to the tank in the blink of an eye on it and I kept checking it while I took a 10-minute ride and even when I was getting on it until it would bog down and it never once has had any supply problem yet