ninjette.org - View Single Post

DannoXYZ · November 26th, 2020, 07:23 PM

look at end where they go into mount. Is there socket-cap bolt holding them in? If they are glued, I can send some bars with mounts.

If you want flat bars, you can also get 2-piece clamps like used in this conversion:
https://www.ninjette.org/forums/show...498#post768498

https://www.ebay.ca/itm/124291214359

November 26th, 2020, 07:23 PM	#6
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	look at end where they go into mount. Is there socket-cap bolt holding them in? If they are glued, I can send some bars with mounts. If you want flat bars, you can also get 2-piece clamps like used in this conversion: https://www.ninjette.org/forums/show...498#post768498 https://www.ebay.ca/itm/124291214359