Quote:
Originally Posted by Edge Genesis
And no I did not run out of terminals. I tried spliced that wire to the two post to see if that would do anything when hooked up. Maybe one other thing worth mentioning. The way the switch is wired currently. I have the grey/brown together on one terminal and the white/white black on another. They are both on the “on” side of the switch. Whether or not I had the switch on or off. I was still getting voltage readings on them.
|
View switch diagram I re-uploaded above. There are three separate inputs and 4 outputs.
White and white/black should be on separate input terminals as their outputs are different circuits.
Yes, brown & grey goes together.