ninjette.org - View Single Post - I finally did the valve clearance on my 06 Ninja

DannoXYZ · August 14th, 2022, 11:51 AM

you can do it with screwdriver for valve-adjustment and deep socket for locknut.

Special Tool is handy because you can do both at once without having to remove and swap to other. Also lets you hold valve adjustment in place while locking it down. Otherwise, using deep socket by itself tends to spin valve adjustment slightly as you tighten locknut.

Special Tool makes process much more efficient. You can do valve-adjustment in just 1/3-1/2 time compared to separate tools.

August 14th, 2022, 11:51 AM	#9
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	you can do it with screwdriver for valve-adjustment and deep socket for locknut. Special Tool is handy because you can do both at once without having to remove and swap to other. Also lets you hold valve adjustment in place while locking it down. Otherwise, using deep socket by itself tends to spin valve adjustment slightly as you tighten locknut. Special Tool makes process much more efficient. You can do valve-adjustment in just 1/3-1/2 time compared to separate tools. Last futzed with by DannoXYZ; August 15th, 2022 at 07:34 AM.