ninjette.org - View Single Post

Bob KellyIII · April 27th, 2023, 09:50 PM

SO YES ! 2 shims and 95 mains Gordon I just re-read where you Did sujest that !
so I am all on board with your sujestions !
.... I bet it will run like a champ now !
Might be worth it to take off the 16 T sprocket and put the smaller one back on and see if it wheelies with a blip of the throttle ! HAHAHAHA ! its a 350lb bike though I doubt that it could ! but with a crisp running engine it may well do just that !
....does your bikes do that guys ? or do you have to "clutch it up"
as low geared as the Ninja is I would think it just might wheelie with a blip of the throttle ! that would be super cool !
....
Bob......

April 27th, 2023, 09:50 PM	#66
Bob KellyIII Retired motorcycle Mc. Name: Robert Location: Weed, California. Join Date: Jul 2021 Motorcycle(s): 2012 Kawasaki Ninja 250R, 2021 CSC TT250, 1977 Triumph Bonneville 750cc,2001 Honda XR650L. Posts: A lot.	SO YES ! 2 shims and 95 mains Gordon I just re-read where you Did sujest that ! so I am all on board with your sujestions ! .... I bet it will run like a champ now ! Might be worth it to take off the 16 T sprocket and put the smaller one back on and see if it wheelies with a blip of the throttle ! HAHAHAHA ! its a 350lb bike though I doubt that it could ! but with a crisp running engine it may well do just that ! ....does your bikes do that guys ? or do you have to "clutch it up" as low geared as the Ninja is I would think it just might wheelie with a blip of the throttle ! that would be super cool ! .... Bob...... __________________________________________________ Its too late when you've gone too far !