and I do like that vacuum hose arrangement better in your picture because the stock way gives very little vacuum to the petcock I noticed that when I put the in line filter on
it would only flow gas too the filter when at max vacuum ! like revving it up and then closing the throttle THEN gas would flow.... not perfect by any means. but it did work.
.... the pictures are hard to see
but that is what I have to work with.... not much help actually ! HA !
I did finally have to resort to diagrams on the manual appendix to get it right.
.....
Ok Gordon I will take them out of their box and put them in without touching anything!
I promise ! the only thing I will touch is the air screws to get the idle right.
(this last time they didn't really want to work very good anyway) (rt one didn't change a thing) probably because of the float height.
.....
later !
Bob.......
__________________________________________________
Its too late when you've gone too far !
|