|
I blocked off the air induction valve on the valve cover. Some people said online they eliminated it when they removed all emissions stuff from their bike since the hose on top leads to a bypass valve or something. I might have read bad info or I could be mistaken in the way I interpreted the information and maybe this is the cause of my problems? The one on there was not fully blocked off but it had a piece of rolled up rubber tightly wound and plugged in there so I assumed nothing was getting by anyways and purchased a block off plate from eBay. The bottom breather that was leading to air box was in tact and there was no oil inside air box, it was one of the things I was advised to check when I first started having issues. On another note, do you know where I can get a head gasket for a little cheaper? It’s going to cost me over $100 just for new gaskets
|