|
I wanna go ride the thing lol.. I am just looking to rule out user error before having them cleaned or purchasing a different set completely.
Air compressor pushing 110 psi per the regulator.
The idle screws: it seems to like to start at about 2 turns out. Once it warms up with the choke you can do whatever you want with them. No change. That is what the frustrating part is. It could turn it to a quarter turn and it runs. Apply choke and it takes off.. so the accelerator adds fuel but when applying the throttle (adding fuel) it dies. And the slides and gasket seemed fine. No tears and it seats. I did add one washer to the needle.
And yes, fully split.
|