ninjette.org - View Single Post

Brently7785 · April 19th, 2010, 07:06 AM

So to start off I had an unfortunate accident and laid her down. Got her back from the shop all cleaned up and ready to go and been riding and everything was fine.

Well...fine until yesterday when the brake light now will now not go off. Its is stuck on bright as if I am always holding the brake. I did have to replace the rear set and thought maybe the sensor was just to tight so I tried lossening it and tightening it and that did not work. I checked with both the back and front brakes and just had the breakin maintenance done too.

Could the sensor be bad after dropping the bike? How would I check this?

Is there somewhere to unplug the rear sensor to find it thats it?

What else should I do?

I currently cannot ride the bike because I am afraid someone will mistaken how the light is and hit me. It is very bright and lit up right now, but it not being able to get brighter when I am actually stopping is NO GO!

Any help would be appreachiated. I know the light worked when I picked up the bike so the shop will not fix it for free.

April 19th, 2010, 07:06 AM	#1
Brently7785 NinjArmy Name: Brenton Location: East Lansing, MI Join Date: Apr 2010 Motorcycle(s): 2009 Ninja 250R Diablo Black (SOLD) Posts: 71	HELP Brake Light and Sensors So to start off I had an unfortunate accident and laid her down. Got her back from the shop all cleaned up and ready to go and been riding and everything was fine. Well...fine until yesterday when the brake light now will now not go off. Its is stuck on bright as if I am always holding the brake. I did have to replace the rear set and thought maybe the sensor was just to tight so I tried lossening it and tightening it and that did not work. I checked with both the back and front brakes and just had the breakin maintenance done too. Could the sensor be bad after dropping the bike? How would I check this? Is there somewhere to unplug the rear sensor to find it thats it? What else should I do? I currently cannot ride the bike because I am afraid someone will mistaken how the light is and hit me. It is very bright and lit up right now, but it not being able to get brighter when I am actually stopping is NO GO! Any help would be appreachiated. I know the light worked when I picked up the bike so the shop will not fix it for free.