ninjette.org - View Single Post - Do shogun sliders get in the way of carb removal?

ninja250 · April 28th, 2010, 06:47 AM

They make it hard(er) to adjust synchronization and idle mixture, but other than that, they don't make it hard to pull the carb. I adjusted the mixtures with them on, so it is doable. Just harder with less space to reach in.

A "MOS" and a ratcheting right angle wrench with driver bits will take care of you. See my build thread pics.. think some of that in there.

April 28th, 2010, 06:47 AM	#2
ninja250 You are sleeping Name: Casey Location: LMFAO!!! Join Date: Nov 2009 Motorcycle(s): 2 Posts: A lot.	They make it hard(er) to adjust synchronization and idle mixture, but other than that, they don't make it hard to pull the carb. I adjusted the mixtures with them on, so it is doable. Just harder with less space to reach in. A "MOS" and a ratcheting right angle wrench with driver bits will take care of you. See my build thread pics.. think some of that in there. __________________________________________________ <Yeah, it's a 250. LMFAO! Weaksauce