View Single Post
Old June 24th, 2010, 04:51 PM   #8
HKr1
IC2(SW)
 
HKr1's Avatar
 
Name: Kerry
Location: Pensacola
Join Date: Nov 2008

Motorcycle(s): .

Posts: A lot.
Nice DIY

Quote:
Originally Posted by kkim View Post
I'm of the belief that it also stiffens up the front end (increases the fork springs' effective spring rate) a bit, too, but others on this board have different views.
Good for setting sag...... But say your spring is 100lbs per inch, you pre-load it an inch.. The next inch is still another 100lbs

But they do make those other type springs
HKr1 is offline   Reply With Quote