Quote:
Originally Posted by atl-ninja250
so .... ill search around for a .25 washer and replace one of the two 1mm washers on there now and it should be perfect. until then... relaxing time
thanks for the help guys!!!
|
0.5mm thickness is probably more common than 0.25mm. But as long as you know what you have, and are intentional about how much you are raising/lowering, you should be good. It takes several tries, as you are finding out. I'm on my twentieth, attempt to re-jet (probably more times than the average bear, but I'm chasing down some gremlins)!