August 19th, 2010, 12:54 PM
|
#13
|
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009
Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F
Posts: A lot.
|
Quote:
Originally Posted by splittrain
Okay so I installed Woodcraft Clipons and Pazzo Shorty Levers today. It all went smooth until after I installed everything but the new clutch lever. I removed the pivot bolt and nut from the clutch side stock lever. Then I proceeded to remove the cable end and insert it into the new lever. I put on the new lever and tested it out (while the rear stand is in use) and I sat on it. I fired her up, kicked hewr into first while holding in the clutch and the wheel kept moving... So what is wrong with it! Idk if i need to adjust the cable or not.
Suggestions? help is encouraged
|
The wheel will spin in 1st even with the clutch held in. I discovered this the first time I ever got it up on a rear stand.
|
|
|