[Justanothermp5]

So i have a question thats been lingering around in my head ever since i put my woodcraft clip-ons, on...like a year or 2 ago
Normally you would need the 1" lowering blocks to lower the bike, you put them in between the stock handle bars and forks, loosen the triple tree clamp and bam, it slides up an inch, lowering the bike an inch

So here is my question..would it be possible to lower the bike, by just loosening the clamp and measuring 1"? since i dont have the stock handlebars anymore i couldn't use the blocks

any info is appreciated, thanks