Quote:
Originally Posted by g21-30
Many people will misunderstand when you say the bearings need to be MACHINED. It is not possible to reduce a 20MM diameter bearing by machining it; however, as you stated, you can insert the appropriately sized bushing, which will reduce the inside diameter. Or, you can just buy the ready made bearings that have the same OD (of the 650R) and ID (of the 250R)!  |
Thanks for this information as well. I will try to find if there are bearing available locally which has 20mm od and 17mm ID.
Does the HUb need to me machined as well?