ninjette.org - View Single Post - DIY - Accessing and adjusting idle mixture screws

p1noysta · November 5th, 2010, 03:47 PM

So i have been trying to adjust my screws and i was trying to use the alternate method and turning it down but i turn my screws down all the way and the rpm doesnt drop. When i Turn them all the way down is that the stock setting?
I turned them down all the way and turned the left one at 2.5 turns out and the rght 1.75 out and im still getting it rich. Like the rpm dips when i blip it. it doesnt do it if the screws are closer to being turned all the way.

November 5th, 2010, 03:47 PM	#40
p1noysta ninjette.org member Name: Armando Location: So Cal Join Date: Sep 2010 Motorcycle(s): 2009 ct blue 250r,2011 black/red zx6r Posts: 64	So i have been trying to adjust my screws and i was trying to use the alternate method and turning it down but i turn my screws down all the way and the rpm doesnt drop. When i Turn them all the way down is that the stock setting? I turned them down all the way and turned the left one at 2.5 turns out and the rght 1.75 out and im still getting it rich. Like the rpm dips when i blip it. it doesnt do it if the screws are closer to being turned all the way.