Quote:
Originally Posted by tonybhall
I didn't have to adjust the cable any at the carbs. The R6 throttle tube is considerably thicker than the stock Ninja tube. And you can really tell. I had some binding inside the housing if I really tightened the bottom screw. But I found that loosening it released the tension. It's still tight enough to hold it together and keep it in place. But it's not as tight as it was originally.
|
Is the R6 tube better fitting for a new-gen as well? I thought I saw a post stating that the pre-gen ninja's tube was smaller than the R6 but the R6 was smaller than the new-gens. I'll need to test with a zip tie at some point. Will probably take it out again in the next couple days to see if I notice a difference.