ninjette.org - View Single Post

onizthegnome · December 8th, 2010, 04:41 PM

i decided to change my stock brake light bulb and install an electronic flasher on my bike today. i left the bike naked out in the cold while i went to autozone to get the parts. i got back and put in the new flasher, a 12V 2 terminal NovitaTech Tridon LF12 240W. then i switched the key to ON and checked my blinkers and then i noticed that the blink rate started to slow down. so i tried to start the bike and all i heard was a rapid clicking sound from near the battery.
not sure if the new flasher caused this or because i left her out in the cold naked. maybe ill try to jump start from a car in the morning but right now its too cold outside.

December 8th, 2010, 04:41 PM	#1
onizthegnome certified newbie Name: oniz Location: north carolina Join Date: Apr 2010 Motorcycle(s): 08 ninja 250r blue Posts: 127	bike wont start after new flasher relay i decided to change my stock brake light bulb and install an electronic flasher on my bike today. i left the bike naked out in the cold while i went to autozone to get the parts. i got back and put in the new flasher, a 12V 2 terminal NovitaTech Tridon LF12 240W. then i switched the key to ON and checked my blinkers and then i noticed that the blink rate started to slow down. so i tried to start the bike and all i heard was a rapid clicking sound from near the battery. not sure if the new flasher caused this or because i left her out in the cold naked. maybe ill try to jump start from a car in the morning but right now its too cold outside. __________________________________________________ locktite ALL the things!!!