ninjette.org - View Single Post - Kawasaki 08 09 10 Ninja 250 250R Emission Block Off Plate

afbarr · February 8th, 2011, 09:51 PM

Ahh... so you sandwich the washers between the e-clips? That makes sense now

I will move the eclip to the third notch and place the washers on top and then put the second eclip on top of them. Do the washers act as spacers or as weight? I will read the link you sent. I also order the Haynes Fuel Systems book and that should arrive soon

Thanks for your help!

February 8th, 2011, 09:51 PM	#67
afbarr ninjette.org member Name: Aaron Location: San Rafael, CA Join Date: Jan 2011 Motorcycle(s): 2009 Ninja 250, 2009 Moto Guzzi V7 Classic (rip) Posts: 29	Ahh... so you sandwich the washers between the e-clips? That makes sense now I will move the eclip to the third notch and place the washers on top and then put the second eclip on top of them. Do the washers act as spacers or as weight? I will read the link you sent. I also order the Haynes Fuel Systems book and that should arrive soon Thanks for your help!