ninjette.org - View Single Post

bprayogo · April 10th, 2011, 06:58 PM

Hello , please find installation instruction written here by our friend from Aussie
http://www.kawariders.com.au/showthr...ugger&p=111018

And for the rear brake line, you need to loop it up, loosen the brake line screw on the rear master cylinder,not too much, just so you can rotate the line and make it loop up over the cover instead of sitting on the arm.Then you can use cable ties to tie it to the rear footpeg .

Small correction : THE BRAKE LINE HOLDER should be removed by opening the screw-then You install the L bracket replacing that brakeline holder so you can screw the cover from the right side . And from the left side you screw it on the screw hole which hold the original chain cover after u removed it.

Hope you understand now .

Cheers

April 10th, 2011, 06:58 PM	#6
bprayogo ninjette.org member Name: Brahmantio Location: Jakarta Join Date: Dec 2008 Motorcycle(s): N250R Posts: 101	Hello , please find installation instruction written here by our friend from Aussie http://www.kawariders.com.au/showthr...ugger&p=111018 And for the rear brake line, you need to loop it up, loosen the brake line screw on the rear master cylinder,not too much, just so you can rotate the line and make it loop up over the cover instead of sitting on the arm.Then you can use cable ties to tie it to the rear footpeg . Small correction : THE BRAKE LINE HOLDER should be removed by opening the screw-then You install the L bracket replacing that brakeline holder so you can screw the cover from the right side . And from the left side you screw it on the screw hole which hold the original chain cover after u removed it. Hope you understand now . Cheers