you need to use a quick dry putty , sand it then spray it with black matte paint.
Remove the brake line holder completely . the reason you dont see any of that holder on the vids is because we remove it, bend the holder and you can free the hose, very easy.
at first we dont want to drill holes in the cover for the reason that some other bikes maybe different, the bolt holes maybe slightly different then our bike which we use for setting the covers and hugger, but then again, if we dont drill that side holes you may find it even harder to install the cover,not that its ever a problem for our mechanic, so we drill it test fit it the best we could .
the right side L Bracket, try switching the holes , open it, turn it ,bolt it so the hole you bolt to arm now for the right cover side. if it still mis aligned, use the closest one then widen the hole using a drill or die grinder, put a washer under it then bolt, you wont see the hole with a washer under it.
I guess practice makes perfect , as our mechanic done this a hundred times and never cracked anything
