ninjette.org - View Single Post - Emergency Shifter Holder Onner Bolt Thingy Replacement DIY

CynicalC · June 3rd, 2011, 09:54 PM

M7 would be a very odd size. M6 uses a 10mm wrench. M8 uses a 12mm. It should be one of them. Bolts are measured by the thread diameter, not the head size.

Use just a dot of blue loctite, not red or you'll regret it later.

June 3rd, 2011, 09:54 PM	#6
CynicalC ninjette.org certified postwhore Name: Colin Location: Bay Area Join Date: Feb 2011 Motorcycle(s): '96 EX250 Posts: A lot.	M7 would be a very odd size. M6 uses a 10mm wrench. M8 uses a 12mm. It should be one of them. Bolts are measured by the thread diameter, not the head size. Use just a dot of blue loctite, not red or you'll regret it later.