ninjette.org - View Single Post - DIY- Removing the Snorkel

kkim · June 5th, 2011, 01:20 AM

you could add a third shim to see if it helps what sounds like a slightly lean condition and see how that affects the results.

also, you might want to try and sync the carbs to remedy the pulsing you see at idle.

I've heard the K&N filters don't seat/seal well in the stock airbox.

June 5th, 2011, 01:20 AM	#120
kkim Join Date: Nov 2008 Posts: Too much.	you could add a third shim to see if it helps what sounds like a slightly lean condition and see how that affects the results. also, you might want to try and sync the carbs to remedy the pulsing you see at idle. I've heard the K&N filters don't seat/seal well in the stock airbox.