Gettin Nekkid
5mm allen for bottom rear of fairings (no washer)
4mm allen for top forward of fairings (plastic washers)
Medium size flathead screwdriver for plastic rivets on underside of fairings.
#2 phillips for press rivets on front inside of fairings.
4mm allen for screw no washer on inside front
CALI gas tank removal
Seat bolts are 3/16 IMPERIAL allen (NOT 5mm, they are very close in size and 5mm WILL STRIP the bolt)
10mm bolts holding tank down
3 hoses on front left of gas tank (unmarked, blue sticker, red sticker)
red hose spits a little gas when removed :P
carb screws: all black on carb one, all silver except one black on carb 2
Ill post up relevant pictures here soon enough as well.
Hoped this would help out other newbies and prevent people from guessing at bolt sizes and stripping stuff.
