Quote:
Originally Posted by Racer x
I use Buell XB foot pegs. tTey will drop you feet 1 inch this is about the level of the peg feelers of the stock pegs. Most rear sets go up .to get your knees below the tank edge you need down and back.
They need to be filed down about 2mm and the hole needs to be drilled just a little bigger but all that is easy to do. They also come in 2 inch drop but I found them ubcomfortable brcause they don't allow any movement on the bike.
|
custom weight reduction on the stock rearsets... FANCY! i like what you did there. i like it alot.