ninjette.org - View Single Post

diwhiteii · July 5th, 2011, 11:33 PM

Hello Everyone,

Here are pictures of the whole installation finished. I replaced the the 2 T fuel connectors with better quality ones. I replaced all the tubing with Helix Blue 1/4 fuel line so I could see the fuel moving. I am using a k&N filter at the moment but plan to change to custom velocity stacks when they arrive from australia . I mounted the ECU nicely under the seat, attached the engine temp sensor below the throttle bodies on the back side, plugged the vacuum hole on the tank and turned the screw from ON to pri position (no vacuum). I had the O2 sensors welded at a angle. I installed the MAP sensor on the #1 throttle body, plugged the hole on the #2 throttle body, ran the fuel return line to spot number #3 on the side of the tank, removed the decelleration cable and ran all the wires neatly. The keyswitch (pink) is soldered directly to the ignition wire at the fuse box(brown with black stripe). The CKP orange & green ground wire are soldered at the crank sensor wire harness(yellow wire is positive, black with white stripe is negitive ). Wiring took a while because I like it perfect, plus I enjoy electrical. When all the body parts are put back on you will see nothing. As you'll see I have alot of custom stuff on my bike in the pictures all of my custom fiberglass body work is off because I am still making some adjustments, so I left it off. This information should help you install the kit. Some pictures in the new manual for the EFI kit are of my bike. By the way, as far as the engine mods I have a jardine ss race full exhaust, BRT TIS CDI preprogrammed, and K&N filter. I will see how many pictures I can get on this site. If I cant get them all on, you can give me your email and I can send them to you. I took 45 pictures total. And to you Tri thank you for the link for the EMI shielding I will but some and try it and let you know.

If anyone has any questions about the install feel free to ask.

David

P6271022n.jpg P6271023n.jpg P6271024n.jpg P6271025n.jpg P6271027n.jpg P6271028n.jpg P6271029n.jpg P6271030n.jpg P6271032n.jpg P6271033n.jpg P6271035n.jpg P6271039n.jpg P6271040n.jpg P6271041n.jpg P6271042n.jpg P6271046n.jpg P6271048n.jpg P6271051n.jpg P6271052n.jpg P6271053n.jpg

July 5th, 2011, 11:33 PM	#94
diwhiteii ninjette.org guru Name: David Location: Lafayette, CA Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279	Pictures of my bike with the EFI Hello Everyone, Here are pictures of the whole installation finished. I replaced the the 2 T fuel connectors with better quality ones. I replaced all the tubing with Helix Blue 1/4 fuel line so I could see the fuel moving. I am using a k&N filter at the moment but plan to change to custom velocity stacks when they arrive from australia . I mounted the ECU nicely under the seat, attached the engine temp sensor below the throttle bodies on the back side, plugged the vacuum hole on the tank and turned the screw from ON to pri position (no vacuum). I had the O2 sensors welded at a angle. I installed the MAP sensor on the #1 throttle body, plugged the hole on the #2 throttle body, ran the fuel return line to spot number #3 on the side of the tank, removed the decelleration cable and ran all the wires neatly. The keyswitch (pink) is soldered directly to the ignition wire at the fuse box(brown with black stripe). The CKP orange & green ground wire are soldered at the crank sensor wire harness(yellow wire is positive, black with white stripe is negitive ). Wiring took a while because I like it perfect, plus I enjoy electrical. When all the body parts are put back on you will see nothing. As you'll see I have alot of custom stuff on my bike in the pictures all of my custom fiberglass body work is off because I am still making some adjustments, so I left it off. This information should help you install the kit. Some pictures in the new manual for the EFI kit are of my bike. By the way, as far as the engine mods I have a jardine ss race full exhaust, BRT TIS CDI preprogrammed, and K&N filter. I will see how many pictures I can get on this site. If I cant get them all on, you can give me your email and I can send them to you. I took 45 pictures total. And to you Tri thank you for the link for the EMI shielding I will but some and try it and let you know. If anyone has any questions about the install feel free to ask. David P6271022n.jpg P6271023n.jpg P6271024n.jpg P6271025n.jpg P6271027n.jpg P6271028n.jpg P6271029n.jpg P6271030n.jpg P6271032n.jpg P6271033n.jpg P6271035n.jpg P6271039n.jpg P6271040n.jpg P6271041n.jpg P6271042n.jpg P6271046n.jpg P6271048n.jpg P6271051n.jpg P6271052n.jpg P6271053n.jpg