Quote:
Originally Posted by Buffalony
I'm tellin ya...shimming the cush was one of the best free mods I've done. My rear end used to practically bang when switching between acceleration and decelertion. Having to focus on this drivelash and not making it pound as hard was horrible in slow stop and go traffic. It added more work. Personally, I believe a dramatic impact of the drive is a potential hazard....(imo)
Adding the shims created a much more fluid transition between accel and decel now and eliminated the"hiting" when changing between the two. I highly recommend it to anyone with a looser rear connection and to all new riders. Helped me out alot.
Here's a DIY link for the mod and a little more detail about the issue:
http://faq.ninja250.org/wiki/How_to_shim_the_cush_drive
|
Agreed. Helped alot for me too. Might I also add that I just added the 15T front sprocket and that eliminated practically all the bucking I had. It changes the gear ratio "just" enough, not alot, to dampen the surge of power in 1st and 2nd gear.