|
Im guessing chances are the other driver was found at fault and payign for repairs?
If so then just have it repaired to original quality or better.
If not then grab a breaker bar to bend stuff and a drill and zipties.
Make a small hole on either side of crack about 1/4" from it, then pull a ziptie through from the underside and back through.
It makes zip stitches and it works great.
__________________________________________________
Yoshi slip on, shimmed 2 washers, zip tie throttle mod, pre-load #2, snorkel delete
2010 SE 250R!
Miles in the saddle: 1000
|