Quote:
Originally Posted by Racer x
The resistance sensor might screw into the thermostat housing.I have never tried. Cutting the hose on the left side is very simple.
|
Just checked it out... Unfortunately, it would take some sort of adaptor to allow the Koso sensor to screw directly into the thermostat housing. Definately not worth trying to fabricate something.
I did have a hard time fitting everything back in after the mandatory hose extension required to fit the inline sensor housing. The coolant cap is sitting a little higher and I couldn't use the original mounting point to re-attach it. I'll find a new one I guess.
Other than that the install seems pretty strait forward.
__________________________________________________
Black 08 250r: Koso dash, yoshi cf slip-on, bikemonkey led, puig windscreen, cc rearset adjusters and shorty levers, shimmed, de-snorkel'd, de-kleen'd , 14/39 gearing, x-ring chain...
|