ninjette.org - View Single Post

kkim · March 22nd, 2009, 02:49 PM

that would be helpful if you take some pics of removing the screws from the carb tops and the springs and clips inside the carb tops once you get them off. seems like there are still some that are a bit spooked about what to do once the tops are removed.

mahalo

ps- when I was playing with shimming, I would just put the tank and seat back on and go out and test. Saved putting the bottom fairings back on. you just need to use hand signals for turns as the blinkers won't work with the front blinkers not hooked up.

March 22nd, 2009, 02:49 PM	#139
kkim Join Date: Nov 2008 Posts: Too much.	that would be helpful if you take some pics of removing the screws from the carb tops and the springs and clips inside the carb tops once you get them off. seems like there are still some that are a bit spooked about what to do once the tops are removed. mahalo ps- when I was playing with shimming, I would just put the tank and seat back on and go out and test. Saved putting the bottom fairings back on. you just need to use hand signals for turns as the blinkers won't work with the front blinkers not hooked up.