So one quick thing to add. I noticed some scratchy noises up front on my bike if I braked hard enough. I found that since the front end of the bike dives so much the brake line was rubbing on the metal on the support that comes off the forks. So to remedy this:
I got the old brake line and cut the rubber piece off with a knife I cut a slit across the rubber so it can be slipped over the new line:
10212011130.jpg
This is what you will end up with:
10212011131.jpg
It won't be super snug on the new line but it will keep the line from rubbing the metal. Pic 9 from the beginning shows where to place this piece at. Slip it over the line then the metal bracket and then bolt to the bike.