ninjette.org - View Single Post

greg737 · November 14th, 2011, 09:32 AM

Okay, I finally found it. The company is called Pingle. They mainly deal in Harley stuff. And their website runs really clunky and slow, so be patient.

It's possible that you could fit one of their adaptor plates to fit the OEM petcock mounting to the tank (their "Metric Male" adaptor would be ideal because, being a 22mm size, it would thread right into the "fuel injection manifold" that they sell).

Here's their "fuel injection manifold" (technically, it's not a petcock because it doesn't have an "On-Off" shutoff switch function). It's a pretty basic item, but it would solve the return flow problem.
http://www.pingelonline.com/powerflo_7310-CH.htm

Here's their petcock-to-tank adaptor plate selection (click on "accessories"). Possibly the "Metric Male" 22mm adaptor plate (at the very bottom of the "accessories" page) could be made to fit the EX-250. I did a quick check of my bike's petcock bolt spacing as it appears to be about 34mm which matches one of Pingle's "Metric Male" adaptor plates. http://www.pingelonline.com/powerflo.htm

November 14th, 2011, 09:32 AM	#185
greg737 - Name: - Location: - Join Date: May 2009 Motorcycle(s): - Posts: A lot.	Okay, I finally found it. The company is called Pingle. They mainly deal in Harley stuff. And their website runs really clunky and slow, so be patient. It's possible that you could fit one of their adaptor plates to fit the OEM petcock mounting to the tank (their "Metric Male" adaptor would be ideal because, being a 22mm size, it would thread right into the "fuel injection manifold" that they sell). Here's their "fuel injection manifold" (technically, it's not a petcock because it doesn't have an "On-Off" shutoff switch function). It's a pretty basic item, but it would solve the return flow problem. http://www.pingelonline.com/powerflo_7310-CH.htm Here's their petcock-to-tank adaptor plate selection (click on "accessories"). Possibly the "Metric Male" 22mm adaptor plate (at the very bottom of the "accessories" page) could be made to fit the EX-250. I did a quick check of my bike's petcock bolt spacing as it appears to be about 34mm which matches one of Pingle's "Metric Male" adaptor plates. http://www.pingelonline.com/powerflo.htm Last futzed with by greg737; November 14th, 2011 at 11:56 AM.