ninjette.org - View Single Post - 08-12 Ninja 250r OEM/Aftermarket Accessories

Broc · January 25th, 2012, 08:18 PM

EVERYTHING IS SOLD!

Up for sale are my OEM/aftermarket accessories that came off my previous 2009 Ninja 250R. I only accept PayPal and all prices reflect this fee and shipping. I will be shipping everything with UPS or USPS to your PayPal address.

Everything was on the bike for around 3,000 miles +/- a few miles and a little over a year +/- a few months. All items have indications of normal use or wear & tear. All items are sold as is with no warranty. All items are used except for the chain/sprocket kit which is brand new & never installed. Even though all items are used they were removed from the bike in good working order. I will try to note all wear & imperfections of the used items to the buyer before hand.

2009 OEM Diablo Metallic Black Solo Seat Cowl - SOLD
w/ grommet, oem paper work, & paperwork for a replacement grommet via your local hardware store!

BikeMonkey Clear Integrated Taillight - SOLD
w/ OEM connectors & the ability to also run your stock rear turn signals in conjunction.
w/ led diode mod, (2) led flashers

Black HMF Street Exhaust - SOLD
w/ optional baffle installed (spark arrestor is general used to mount the baffle but I have made a custom plate & spring to hold the baffle under the end cap) See Picture.
- Exhaust was taken off the bike in good working order and sounds very good. Exhaust has about 3,000 miles logged.
- The baffle actually helps increase in the low/mid range ooomph as well.
- Exhaust does have a mark all the way around the muffler where the mounting band installs.
- The HMF logo looks a little rough around the edges from my meticulous washing of the bike

- Baffle has surface rust.
- See pictures for condition of the muffler/paint.
- Heat Shield & all hardware included....(1) Large bolt clamp for the header tube & (2) worm clamps for the heat shield/beauty cover (does use the stock large muffler bolt from the stock muffler to mount to the exhaust hanger.)
- Tip for installation. The exhaust is a crazy tight fit to the stock header tube even before the heavy duty bolt clamp. You must heat up the end of the exhaust and wiggle wiggle wiggle. Unless you are crazy strong.
***Just noticed I did not picture the silver end cap for the exhaust. Please see the picture below of the exhaust on the bike to see the end cap***

BRAND NEW Sprocket Center RK Gold Chain & Sprocket Kit - SOLD
w/ GOLD RK 520XSO X-Ring Chain (cut to the correct length)
w/ GOLD Rivet Style Master Link
w/ 15t Chromoly Steel Front Sprocket
w/ 45t Superlite Black Heat Treated Steel Rear Sprocket
- There is one tiny tiny mark on the side of the rear sprocket from shipping. It is on the side with the white lettering. Circled in red.

Bought the kit brand new at the link below.........Kit says it will fit a 88-10 Ninja 250 but I purchased the kit direct from a sales representative for a 2009 Ninja 250R
http://www.sprocketcenter.com/p/9842...nja-88-10.html

January 25th, 2012, 08:18 PM	#1
Broc ninjette.org member Name: Broc Location: America Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250R Black - Sold / 2011 Honda CB1000R Posts: 176	08-12 Ninja 250r Exhaust & Chain/Sprocket Kit EVERYTHING IS SOLD! Up for sale are my OEM/aftermarket accessories that came off my previous 2009 Ninja 250R. I only accept PayPal and all prices reflect this fee and shipping. I will be shipping everything with UPS or USPS to your PayPal address. Everything was on the bike for around 3,000 miles +/- a few miles and a little over a year +/- a few months. All items have indications of normal use or wear & tear. All items are sold as is with no warranty. All items are used except for the chain/sprocket kit which is brand new & never installed. Even though all items are used they were removed from the bike in good working order. I will try to note all wear & imperfections of the used items to the buyer before hand. 2009 OEM Diablo Metallic Black Solo Seat Cowl - SOLD w/ grommet, oem paper work, & paperwork for a replacement grommet via your local hardware store! BikeMonkey Clear Integrated Taillight - SOLD w/ OEM connectors & the ability to also run your stock rear turn signals in conjunction. w/ led diode mod, (2) led flashers Black HMF Street Exhaust - SOLD w/ optional baffle installed (spark arrestor is general used to mount the baffle but I have made a custom plate & spring to hold the baffle under the end cap) See Picture. - Exhaust was taken off the bike in good working order and sounds very good. Exhaust has about 3,000 miles logged. - The baffle actually helps increase in the low/mid range ooomph as well. - Exhaust does have a mark all the way around the muffler where the mounting band installs. - The HMF logo looks a little rough around the edges from my meticulous washing of the bike - Baffle has surface rust. - See pictures for condition of the muffler/paint. - Heat Shield & all hardware included....(1) Large bolt clamp for the header tube & (2) worm clamps for the heat shield/beauty cover (does use the stock large muffler bolt from the stock muffler to mount to the exhaust hanger.) - Tip for installation. The exhaust is a crazy tight fit to the stock header tube even before the heavy duty bolt clamp. You must heat up the end of the exhaust and wiggle wiggle wiggle. Unless you are crazy strong. *****Just noticed I did not picture the silver end cap for the exhaust. Please see the picture below of the exhaust on the bike to see the end cap* BRAND NEW Sprocket Center RK Gold Chain & Sprocket Kit - SOLD w/ GOLD RK 520XSO X-Ring Chain (cut to the correct length) w/ GOLD Rivet Style Master Link w/ 15t Chromoly Steel Front Sprocket w/ 45t Superlite Black Heat Treated Steel Rear Sprocket - There is one tiny tiny mark on the side of the rear sprocket from shipping. It is on the side with the white lettering. Circled in red. Bought the kit brand new at the link below.........Kit says it will fit a 88-10 Ninja 250 but I purchased the kit direct from a sales representative for a 2009 Ninja 250R http://www.sprocketcenter.com/p/9842...nja-88-10.html __________________________________________________ 2009 Black 250R - Stock and staying that way. No matter what you do it's still a 250 at the end of the day! Save your money for gear, riding lessons, & a 600cc Last futzed with by Broc; February 15th, 2012 at 09:18 AM. Reason: EVERYTHING IS SOLD!