ninjette.org - View Single Post

KChatham · January 26th, 2012, 10:28 PM

Thanks for the reply skippii. The part was just loose in one of the bowls. I found it when I initially took the carbs apart. Once I put them back together and back on the bike it wouldn't start at all.

I know the bike is getting fuel because you can see it going through the fuel filter and, more importantly, fuel will drain out of the bowls.

Tonight I will put on my second set of carbs. These came off one of my parts bikes so I don't know if the jetting is even right but we'll see.

January 26th, 2012, 10:28 PM	#18
KChatham ninjette.org member Name: Kyle Location: San Luis Obispo Join Date: Sep 2011 Motorcycle(s): 1988 EX250 Ninja Posts: 48	Thanks for the reply skippii. The part was just loose in one of the bowls. I found it when I initially took the carbs apart. Once I put them back together and back on the bike it wouldn't start at all. I know the bike is getting fuel because you can see it going through the fuel filter and, more importantly, fuel will drain out of the bowls. Tonight I will put on my second set of carbs. These came off one of my parts bikes so I don't know if the jetting is even right but we'll see.