Quote:
Originally Posted by setasai
Alright it started up fine this morning. Took a couple starts but it seems fairly stable.
@ n4mwd Quicksteel says it's gasoline resistant. One of the uses they described is to plug up leaks in a gas tank.
I made the tube about a foot long and sloped straight up and then bends around. Lets see if this helps/solves the issue. I also have the MAP sensor coming from the top of the TB so there really shouldnt be much flowing up that tube. I think if the MAP tube diameter was larger, that might solve it as well. |
think it would be bad to drill it out a bit? lol and just make sure the sensor is facing down. I started off with like two feet of tubing going in and out of the tb's and it still got gas in there. So make sure its facing down.
__________________________________________________
1990 250F. ex300 motor swap, 15/42 gearing, flush side markers, newgen intergrated front fairing, rear integrated turn signals, DB Touring Bubble, zx600 rear shock, Custom DanMoto Exhaust
|