Quote:
Originally Posted by cuong-nutz
Went down at the track and broke my front turn signal. I have some old dual led pods and I am using one to replace the turn signal. I have it connected but it doesn't flash. It just stays lit.
What size diode do I need?
|
Do you have LEDs all around or just in the front. If you just have them in the front all you need is to hook up a resistor since the power draw from the led isn't enough to activate the stock relay. A 8-10 ohm resistor should solve the problem.
If you have LEDs all around, just go to this thread and the ~4th post from the bottom has pics and such for the diode installation for all around LEDs.
http://www.ninjette.org/forums/showthread.php?p=43426