Quote:
Originally Posted by edxmon
Exactly because of that I lowered the RPM on my dremel to minimum and went as slow as I could, I did go half way down on a 1" cutting wheel. I also reused the license plate mount and had to cut part of it, so I HAD to bump up the RPM or wouldnt have cut through it. I was shooting sparks all over the place, I was scared to light the garage on fire XD
|
Lol speaking of sparks...when I was shimming the needles on the carbs, I happened to strip the top right screw on the right-hand carb (hard to even get to). I couldn't get in there to get the screw out, so I took the dremel and cut down the head of the screw so I could fit a flat-head in there.
Anyways, the sparks flying right below where the gas tank would sit, with all those hoses was kind of unnerving