|
its at 15w oil, stock springs with added preload set for 30mm sag. no emulators or special valving. forks are at 20mm on top of the triple with stock rear height currently. i had an r6 shock on the rear before but i didn't like the setup i had which took me from about 130mm travel down to about 100mm on the rear, so i put the stock rear shock and linkage back on. it seems like the rear shock is less important on these bikes but i think i'm going to make a new pivot knuckle to get back the 3cm lost travel and go back to the r6 shock just for the damping control. the tires will be the bridgestone slicks. not sure about compound details or anything yet. i will probably need to make some changes to stiffen things up im thinking. probably drop the forks down to 5mm just cause of the tiny front tire
|