ninjette.org - View Single Post - Carb overflow. What could cause this to happen?

Monkeytofu · July 29th, 2012, 10:06 PM

So I've fixed the leak! I've also installed a fuel line filter and changed the oil. On pouring out the oil I noticed that the oil had a massive amount of gas in it, and it's good I went ahead and changed it.

However... after running my bike for a bit around the neighborhood my bike started to lose power. It soon after started to dip below 1000 RPM and stall out anytime I would release the clutch. The RPMs seemed to stall around 3-5 RPM. My bike stays running in idle and I have not seen a single leak so I'm attributing this to something me and my friend did wrong while assembling it.

Any ideas?

July 29th, 2012, 10:06 PM	#14
Monkeytofu I told you bro Name: Noor Location: Austin, Texas Join Date: Jun 2012 Motorcycle(s): 1996 Ninja 250r Posts: 680	So I've fixed the leak! I've also installed a fuel line filter and changed the oil. On pouring out the oil I noticed that the oil had a massive amount of gas in it, and it's good I went ahead and changed it. However... after running my bike for a bit around the neighborhood my bike started to lose power. It soon after started to dip below 1000 RPM and stall out anytime I would release the clutch. The RPMs seemed to stall around 3-5 RPM. My bike stays running in idle and I have not seen a single leak so I'm attributing this to something me and my friend did wrong while assembling it. Any ideas?